Designing Against Falls: Using Gait Data to Create Safer Spaces and Products for Older Adults

—

Author:

7–11 minutes

Falls are one of the most serious health risks facing older adults. The World Health Organization identifies falls as the second-leading cause of unintentional injury death worldwide, after road injuries. The consequences extend well beyond the injury itself: loss of confidence, reduced activity and, often, loss of independence.

Fall prevention combines clinical care with attention to the environments people use. Exercise, medication review and vision checks address important personal risk factors. Design addresses another part of the problem: unexpected level changes, poorly placed handrails and spaces that leave little room to turn. Gait data helps designers examine how people encounter these features during everyday movement.

How Walking Changes with Age

Research has identified several age-associated changes in gait, although patterns vary with health, walking speed and task conditions:

Gait characteristicTypical change with ageWhy it matters for falls
Walking speedSlowerRelevant to crossing times and circulation planning; may also indicate changes in mobility
Step lengthShorterAlters how people approach steps, curbs and transitions
Double support timeLonger time with both feet on the groundReflects a more cautious, balance-preserving gait
Foot clearanceCan become lower and more variable, especially when attention is dividedGreater risk of tripping on small obstacles and edges
Step variabilityGreater variation from step to stepLinked to future falls in older adults
Turning and stoppingCan be slower and less stableHigher risk in corridors, doorways and confined spaces

Of these, foot clearance deserves particular attention. During the swing phase of walking, the toe passes only a short distance above the ground: a treadmill study of 121 healthy adults aged 20–80 measured an average minimum toe clearance of about 15 mm. In normal walking, older and younger participants cleared the ground similarly, but when older adults walked while performing a demanding mental task, clearance dropped and very low values became more frequent, increasing the modelled risk of tripping. Real-world clearance also varies with walking speed, footwear, fatigue, attention and surface conditions. Small, uneven or poorly visible level changes can therefore be meaningful trip hazards, particularly when visibility is poor or attention is divided.

Older woman walking along an instrumented walkway with motion capture cameras as a researcher records gait data
AI-generated

Translating Gait Findings into Design Criteria

Several environmental features are especially sensitive to age-related gait changes:

  • Level changes and thresholds. Small steps, raised door thresholds and uneven paving interact directly with reduced toe clearance. Flush transitions or clearly ramped changes reduce trip risk.
  • Stairs. Riser height, tread depth and consistency within each flight all matter. Evaluate these dimensions against applicable building requirements and the foot placement needs of intended users.
  • Step edges and contrast. Reduced contrast sensitivity makes it harder to see where a step begins. High-contrast nosings and good lighting help people judge edges.
  • Handrails. Handrails should be continuous, graspable and extended beyond the top and bottom steps, with dimensions and placement evaluated against applicable building, accessibility and safety requirements for the intended setting.
  • Floor surfaces. Slip resistance, consistency and the avoidance of busy patterns that can be mistaken for level changes all reduce risk.
  • Space to turn and pause. Corridors, bathrooms and entrances should allow slow, wide turns and places to stop and rest.

WHO notes that home fall-hazard assessment and modification can reduce falls among older adults already at elevated risk, citing a 2023 Cochrane review that found a 38% reduction in fall rates in these higher-risk groups. The same review did not demonstrate an effect in unselected populations.

Older man climbing stairs using a continuous handrail, with high-contrast step nosings and handrails on both sides
AI-generated

Products That Respond to Gait

The same principles apply to products. Footwear design requires attention to secure fit, sole geometry, slip resistance and clearance during walking. These features should be evaluated together under representative walking conditions. Mobility aids such as rollators should be sized to the user’s height and posture so they support rather than disrupt gait. Bed and chair heights influence how stably people stand up and begin walking, which is a frequent moment of falls at home and in care settings.

Wearable sensors and smart home systems increasingly monitor gait to detect changes that may signal rising fall risk. Their usefulness depends on understanding what normal variation looks like for the population being monitored.

From Gait Studies to Design Data

Traditional gait analysis takes place in laboratories with motion capture systems and force plates. That data is detailed but limited in sample size and setting. Bringing gait data into design requires a broader view:

  1. Population-level gait data. Collect gait parameters across age groups and functional levels, not just young or healthy reference groups.
  2. Movement in context. Capture walking on stairs, slopes, thresholds and turns, where falls actually happen.
  3. Body shape and motion together. Combine 3D body data with motion data so that foot dimensions, limb proportions and gait patterns can be evaluated together.
  4. Simulation. Use digital human models to review space, reach, clearance and circulation in environments and products before they are built.

Comfo Labs applies 3D human body data and 4D motion data to these questions, helping architects, product designers and healthcare teams review spaces and products using age-related body and movement data. SIZE LAB provides 3D body-shape data, anthropometric measurements, and representative 3D personas that include older body types, and doodll.ai supports concept exploration, design variations, and 3D visualization of alternative layout and product concepts.

Team reviewing a SIZE LAB visualization of walking paths, door clearance and turning space for different body types (illustrative visualization)
AI-generated

High-Risk Moments in Daily Life

Falls cluster around specific everyday activities. Focusing on these moments helps designers direct attention where it matters most:

  • Getting up. Rising from a bed, chair or toilet requires strength and balance at the same time. Seat height, armrests and nearby grab rails make the transition safer.
  • Turning. Turning in tight spaces, such as bathrooms and narrow hallways, is a frequent point of instability. Space to turn slowly and something to hold reduce the risk.
  • Moving between surfaces. Transitions from carpet to tile, from indoors to outdoors or onto a step change the conditions underfoot. Consistent, flush, clearly visible transitions help.
  • Walking at night. Low light reduces the visual information older adults rely on to judge edges and obstacles. Path lighting between bedroom and bathroom is a simple measure worth considering.
  • Carrying items. Carrying laundry, groceries or trays occupies the hands and can block the view of the floor and the stairs ahead.
Older woman walking from the bedroom to a bathroom with a flush floor transition, low-level path lighting and grab rails
AI-generated

Evaluating each of these moments with age-appropriate gait and body data turns general fall prevention advice into specific, testable design requirements. Reviewing these activities helps teams identify where clearance, support and visibility need closer attention. Site observations and incident records can then guide priorities.

Fall Prevention Design Checklist

  • Thresholds: Are level changes eliminated or clearly ramped and marked?
  • Stairs: Are riser heights and tread depths consistent throughout each flight?
  • Edges: Are step nosings high in contrast and well lit?
  • Handrails: Are handrails continuous on both sides, graspable and extended beyond the stairs?
  • Floors: Are surfaces slip resistant, consistent and free of confusing patterns?
  • Turning space: Is there enough room for slow, wide turns in corridors and bathrooms?
  • Seating: Do chair and bed heights support stable sit-to-stand transitions?

Falls are often treated as accidents. Many are better understood as predictable mismatches between a changing gait and an unchanging environment, and many of these mismatches can be reduced through design.

Frequently Asked Questions

Why do older adults fall more often?

Falls usually result from interacting factors, including changes in balance, strength, vision and gait, medication effects and environmental hazards. Gait data helps designers examine the movement-related part of that risk, but does not explain every fall.

What is minimum toe clearance and why does it matter for falls?

Minimum toe clearance is the local minimum distance between the toe and the walking surface around mid-swing. It varies with the person, walking conditions and measurement method. The study discussed above reported an average of about 15 mm, illustrating the limited clearance available during this part of the step.

How can home design help prevent falls in older adults?

Remove or clearly ramp level changes and thresholds, keep floor surfaces slip resistant and consistent, light the path between bedroom and bathroom, provide grab rails at sit-to-stand points, allow space for slow turns and use seat and bed heights that support stable standing up.

What makes stairs safer for older people?

Riser height, tread depth and consistency within each flight all matter, and should be evaluated against applicable building requirements and the foot placement needs of users. High-contrast step nosings, good lighting and continuous handrails on both sides that extend beyond the top and bottom steps also reduce fall risk.

Which areas of the home need the most attention for fall prevention?

Bathrooms, stairs and bedrooms deserve particular attention. Bathrooms combine wet floors, tight turning space and sit-to-stand transitions, stairs demand precise foot placement, and the route from the bedroom to the bathroom is often walked at night in low light.

How is gait analysis used in fall prevention design?

Population-level gait data, especially data captured on stairs, slopes, thresholds and turns, defines design criteria based on how older adults actually walk. Combined with 3D body data and digital human simulation, it helps teams review spaces and products for clearance, reach and movement before they are built. Trip and balance risks still need to be confirmed through observation, testing and incident data.

WORK WITH COMFO LABS

Designing safer spaces or products for older adults?

Tell us about your project and users. We use human body and motion data to help you review how older adults navigate spaces and use products.

References

  • Hausdorff, J. M., Rios, D. A., & Edelberg, H. K. (2001). Gait variability and fall risk in community-living older adults: A 1-year prospective study. Archives of Physical Medicine and Rehabilitation, 82(8), 1050–1056. https://doi.org/10.1053/apmr.2001.24893
  • Killeen, T., Easthope, C. S., Demkó, L., Filli, L., Lőrincz, L., Linnebank, M., Curt, A., Zörner, B., & Bolliger, M. (2017). Minimum toe clearance: Probing the neural control of locomotion. Scientific Reports, 7, 1922. https://doi.org/10.1038/s41598-017-02189-y
  • Montero-Odasso, M., van der Velde, N., Martin, F. C., Petrovic, M., Tan, M. P., Ryg, J., et al. (2022). World guidelines for falls prevention and management for older adults: A global initiative. Age and Ageing, 51(9), afac205. https://doi.org/10.1093/ageing/afac205
  • Winter, D. A., Patla, A. E., Frank, J. S., & Walt, S. E. (1990). Biomechanical walking pattern changes in the fit and healthy elderly. Physical Therapy, 70(6), 340–347. https://doi.org/10.1093/ptj/70.6.340
  • World Health Organization. (2026). Falls [Fact sheet]. https://www.who.int/news-room/fact-sheets/detail/falls

Subscribe Comfo Labs Newsletter

Stay up to date with regular insights and information on ergonomics, human body data, and ergonomic design.

Join 19 other subscribers